.png?width=396&height=176&name=CC%20%20fiserv.%20(3).png)
Hardware : Ingenico Lane 3000 : Setting a Static IP Address for your Device.
Article Contents: Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below. Access the Admin Menu.
Step by Step
Step 1: Press the down arrow to scroll down and press O (green button) to select Configuration.
Step 2: Press the down arrow to scroll down and press O (green button) to select IP Settings.
Step 3: Press the down arrow to scroll down and press O (green button) to select Configure IP.
Step 4: Press the down arrow to scroll down and press O (green button) to select Static IP.
Step 5: Enter the static IP Address using the number pad and press O (green button).
Step 6: Enter the Network Mask using the number pad and press O (green button).
Step 7: Enter the Gateway Address using the number pad and press O (green button).
Step 8: Enter the DNS Address 1 using the number pad and press O (green button).
Step 9: Enter the DNS Address 2 using the number pad and press O (green button). The terminal displays Updating IP configuration and restarting terminal, then restarts to connect using the new static configuration.
Step 1: Press the down arrow to scroll down and press O (green button) to select Configuration.
Step 2: Press the down arrow to scroll down and press O (green button) to select IP Settings.
Step 3: Press the down arrow to scroll down and press O (green button) to select Configure IP.
Step 4: Press the down arrow to scroll down and press O (green button) to select Static IP.
Step 5: Enter the static IP Address using the number pad and press O (green button).
Step 6: Enter the Network Mask using the number pad and press O (green button).
Step 7: Enter the Gateway Address using the number pad and press O (green button).
Step 8: Enter the DNS Address 1 using the number pad and press O (green button).
Step 9: Enter the DNS Address 2 using the number pad and press O (green button). The terminal displays Updating IP configuration and restarting terminal, then restarts to connect using the new static configuration.