Skip to content
English
Live Chat Support
  • There are no suggestions because the search field is empty.

Hardware : Ingenico Lane 3000 : Device Disconnected

Article Contents: This article covers the steps to follow if your Ingenico Lane 3000 device is displaying "Disconnected."

Step by Step

Step 1: Verify that you are using the provided multi-point mono connector (Ethernet) cable and power supply. The power supply plugs into the splitter on the Ingenico multi-point mono connector cable.

Step 2: Verify that the Ethernet jack on the multi-point mono connector cable is plugged securely into your router, modem, networking switch, or Ethernet wall jack.

Step 3: Verify that your device was obtained from the CardPointe shop, or your software provider.

Step 4: Consult with your IT administrator to verify that the Ethernet port being used has access to the Internet, and that your internal network allows CardPointe Integrated Terminal connections. This will ensure that a firewall is not blocking the connection.