Hardware : Ingenico Lane 3000 : Setting a Static IP Address for your Device.

Article Contents: Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below. Access the Admin Menu.

Step by Step

Step 1: Press the down arrow to scroll down and press O (green button) to select Configuration.

Step 2: Press the down arrow to scroll down and press O (green button) to select IP Settings.

Step 3: Press the down arrow to scroll down and press O (green button) to select Configure IP.

Step 4: Press the down arrow to scroll down and press O (green button) to select Static IP.

Step 5: Enter the static IP Address using the number pad and press O (green button).

Step 6: Enter the Network Mask using the number pad and press O (green button).

Step 7: Enter the Gateway Address using the number pad and press O (green button).

Step 8: Enter the DNS Address 1 using the number pad and press O (green button).

Step 9: Enter the DNS Address 2 using the number pad and press O (green button). The terminal displays Updating IP configuration and restarting terminal, then restarts to connect using the new static configuration.